Article: 51082 of rec.radio.amateur.digital.misc From: "SOMMERGIBILE" Subject: How to receive out of band signals.. Date: Sat, 22 Oct 2005 22:58:20 +0200 Message-ID: <435aa9a2$0$8479$5fc30a8@news.tiscali.it> by an VHF or UHF radio and other projects on: http://web.tiscali.it/am2zy/index.html Article: 51083 of rec.radio.amateur.digital.misc From: "Nick B." Subject: Re: Wanted: KAM All-Mode EPROM Date: Sat, 22 Oct 2005 22:40:17 +0100 Message-ID: <3rvpu2Fl8mo4U1@individual.net> References: VE3PMK wrote: > Bill wrote: > >> I recently was given an older KAM All-Mode TNC. It only has version >> 3.06 firmware. I was hoping to find a version 5 or later EPROM. Does >> anyone have an EPROM to sell me or can tell me where to get the bin >> file to burn my own EPROM. I have talked to Kantronics and they told >> me they no longer support this TNC. Thanks. >> >> VO1BIL >> Bill >> >> >> The latest version you can fit in a KAM without expansion board is version 6.1 - you can find the manual updates for PACTOR on www.mods.dk Another point to note is that if your KAM is pre-version 5 then you will need to upgrade the EEPROM IC otherwise it will not work properly with later firmware. -- Nick B. Article: 51084 of rec.radio.amateur.digital.misc From: "Bill" References: <3rvpu2Fl8mo4U1@individual.net> Subject: Re: Wanted: KAM All-Mode EPROM Message-ID: Date: Sun, 23 Oct 2005 02:00:31 -0230 Thanks for the info. I knew it would only work with ver 6.1 but I didn't realize I needed an EEPROM as well. Maybe I got what I got doesn't seem like much chance on finding both chips. Thanks for the link to the manual. Bill "Nick B." wrote in message news:3rvpu2Fl8mo4U1@individual.net... > VE3PMK wrote: >> Bill wrote: >> >>> I recently was given an older KAM All-Mode TNC. It only has version >>> 3.06 firmware. I was hoping to find a version 5 or later EPROM. Does >>> anyone have an EPROM to sell me or can tell me where to get the bin file >>> to burn my own EPROM. I have talked to Kantronics and they told me they >>> no longer support this TNC. Thanks. >>> >>> VO1BIL >>> Bill >>> >>> >>> > The latest version you can fit in a KAM without expansion board is version > 6.1 - you can find the manual updates for PACTOR on www.mods.dk > > Another point to note is that if your KAM is pre-version 5 then you will > need to upgrade the EEPROM IC otherwise it will not work properly with > later firmware. > > -- > Nick B.