Daily GLOWBUGS

AB4EL Ham Radio Homepage @ SunSITE

Subject: glowbugs V1 #52
glowbugs            Saturday, June 7 1997            Volume 01 : Number 052


Date: Wed, 04 Jun 1997 21:54:55 -0700
From: Richard Wilkerson <richqrp@cts.com>
Subject: BA QSO W7QQQ

Jack I have seen you from time to time on this list.. Thanks for the QSO
Tonight.. I tried to say that I had seen you on this list but the QRN/
QSB took me out.. Nice chat...thanks..Did not hear anyone else though,
all I could hear was you........
- -- 
	72's........  rich
Rich Wilkerson, WD6FDD, Santee, Ca.
 NorCal, ARCI, ScQRPions, E.C.R.A.



Date: Wed, 04 Jun 1997 22:45:18 -0700
From: Gerald Caouette <ve6nap@oanet.com>
Subject: Valves and stuff for sale

I have the following tubes

As I only want a few of these for my own use
I am offering the rest for sale

I have 60 Jan 7645 Twin tetrodes for sale
NIB/NOS in original Westinghouse Boxes
and would like $ 3.00 U$ each
or
5   for 12.00
10  for 20.00

I have  10   NIB/NOS  Eimac/ Varian JAN 8167 / 4CX300A
Metal Ceramic tubes
These list for over $200.00 each I would like $ 55 U$ each
or 
2 for $100.00 U$
3 for $145.00 U$
4 for $180.00 U$

I have  80   NIB/NOS  JAN 5719 miniature triodes
and would like $ 2.50 U$ each
or
5 for $10.00 U$
25 for 48.00 U$
50 for $90.00 U$

I still have 480  NIB/NOS JAN 5933 valves
These are a military equivelent to the 807
Same base, pin out and electrical specifications

looking for $6.00 U$ each
or
4   for   20.00 U$
10  for   45.00 U$
50  for  200.00 U$  ( 1 case  )
100 for  375.00 U$  ( 2 cases )
 
I have about 40 tube retainers 
for these or other tubes of the same diameter  
These were used to keep the tube in the socket 
under rough service conditions..

cost you about 1.00 each   


Metal Enclosed Relays

- -	New time delay relays
	Flange mount
	Solder terminals 
	6.3 Volt heater 
	SPST N.O. 3A @ 250 VAC
	your choice 	60 Second  or 	85 Second version

$ 5.00 each


- -	NEW sealed metal case relay 
	Mil Spec 25267-A1 Class B8
	4 point stud mount 
	Solder terminals
	115VAC coil with internal 1/2 wave rectifier
	Works ok at 48 VDC
	4PDT 5 Amp @ 28 VDC or 115VAC up to 400 HZ
	leach corp / Part # 9220 - 4186
	
$ 20.00 each
$ 30.00 for 2
	

TRW Cinch terminal strips
	NEW - Part # 10-172-Y 	

$5.00 for a box of 10 terminal strips
	
All prices are in US funds

Shippng costs are extra 

email if intrested
to
ve6anp@oanet.com
Edmonton, Alberta, Canada



Date: Thu, 05 Jun 1997 14:36:14 +0200
From: Jan Axing <janax@li.icl.se>
Subject: Updated tube data

Hi all;

I have added some data on EL34/6CA7 on my pages at
http://www.algonet.se/~janax/tubedata.htm
Source is Philips 1958 data book.

I'm constantly updating the pages as soon as I find data on
useful tubes.

Enjoy!

Jan, SM5GNN



Date: Thu, 5 Jun 1997 05:45:19 -0700 (MST)
From: Jack Meadows <jackmead@getnet.com>
Subject: Propose BA QSO's on 20 meters

On Wed, 4 Jun 1997, Richard Wilkerson wrote:

> Jack I have seen you from time to time on this list.. Thanks for the QSO
> Tonight.. I tried to say that I had seen you on this list but the QRN/
> QSB took me out.. Nice chat...thanks..Did not hear anyone else though,
> all I could hear was you........
> -- 
> 	72's........  rich
> Rich Wilkerson, WD6FDD, Santee, Ca.
>  NorCal, ARCI, ScQRPions, E.C.R.A.
> 
Hi Rich,
Nice to meet you on last night on 7050 khz. W7EKB, Ken was in there but
qrn kept us from making it a threesome.

Seems like 20 meters would be a better place for BA's to meet in the
summer. Less noise and more coverage. Would 14.050 work? 
Hope to cuagn. Now, back to work fixin up that ole Knight T-150
transmitter.  Ha!

Jack  W7QQQ
Mesa, Arizona



Date: Thu, 5 Jun 1997 18:18:11 -0400 (EDT)
From: EWoodman@aol.com
Subject: Mic. connectors

Brian wrote:

>In a bind for one of those "BOATANCHOR" type screw-on microphone 
>plugs?
>Well, this is amazing but I read in a n old Hints and Kinks, that you 
>can use a PL-259 plug for one of those things in a pinch!

Bry,
By George, you're right. You must have been reading my mind tonight! I've got
a D-104 comming to use with my Knight T-150. I was just sitting here staring
at that connector and wondering what I was going to do. The  mic I use now
has a 1/4" plug but the plug part unscrews leaving the correct part to screw
onto the connector on the rig. I really didn't want to remove that connector
from the Shure mic and put it on the D-104 but I figured I'd have to. You
just solved my problem! Thanks.!

Eric   KA1YRV



Date: Thu, 5 Jun 1997 16:41:19 -0700 (MST)
From: Jack Meadows <jackmead@getnet.com>
Subject: AM Phone on 20 meters

Hi gang!

Is anyone active on 20 meters AM phone?
I have a Knight T-150 to get me started again in good soundin amplitude
modulation style! I've been monitoring 14.286 but haven't heard any
am'rs. Any sugguestions?

Thanks!
Jack  W7QQQ
7050 kHz BA'er and Glowbugger



Date: Fri, 6 Jun 1997 21:02:15 -0700 (PDT)
From: Ken Gordon <keng@uidaho.edu>
Subject: AD4YH...

does anyone know his e-mail address?

I have heard him near 7050 for several nights, madly calling CQ Cwist. He
doesn't hear me I guess.  How much power is he running ?

I am running 15 watts (AN/GRC-109)


Kenneth G. Gordon W7EKB			College of Mines and Earth Resources
226 N. Washington St.		//or//		University of Idaho
Moscow, Idaho 83843				Moscow, Idaho 83844
(208)-882-8745					(208)-885-6133
Great Highland Pipes, Amateur Radio, Electronic Consulting, Home-Schooling
			Traditional Roman Catholic

			My PGP Public Key Upon Request.



End of glowbugs V1 #52
**********************

AB4EL Ham Radio Homepage @ SunSITE